SAA power board

SAA power board 1:USB charge for IPHONE,IPAD,MP3,MP4 2:4-way socket With 2 USB output 3:Aus type,Surge protect.

SAA power board

1:USB charge for IPHONE,IPAD,MP3,MP42:4-way socket With 2 USB output 2*500ma3:Aus type,Surge protected

4:SAA approve

5:Heavy duty cable .

U66807S.

Product Specifications:

1:Input:Car charge:DC12V-24V

             Travel charger:100V-240V~,50/60HZ

2:Output:1 USB DC 5V/1000mA

3:Ripple Boltage:<100mA

4:End chargeing current:100mA

5:Over-Current protection.

Must

USB 2.0, A-type socket AC/DC charger for use in domestic and industrial environments.Should operate with a standard, 3-pin UK socketComply with the following regulatory requirements Be fully tested, approved, certified and marked appropriately for CE marking.RoHS compliant and marked appropriately.Fulfil the requirements of Low Voltage Directives 2006/95 EG (EN 60950-1 11/2006)Fulfil the regulations of the EMC Directives 2004/108 EC (EN 55022 05/2008 & EN 55024 10/2003)Any other applicable regulatory standards.Be marked and suitable for WEEE regulatory requirements.All EMC and safety test reports to be supplied with samples.Pass independent laboratory test conducted by notified body.Meet the following electrical requirements Output voltage: 5.0V ±0.25V (at 250mA to 350mA max)Output current: 1000 mAUniversal voltage inputs (90V – 250V)Input frequency: 47-63 HzFaultlessly function within an ambient temperature range from -10°C to +55°C, between 5% to 95% non-condensing relative humidity.Be suitable for storage and transportation in conditions between –40°C to +75°C and  5% to 95% non-condensing relative humidity.Weigh no more than 80gThe elapsed time between the application of input power and the attainment of output voltage to the nominal value shall not exceed 1 second.The power supply shall withstand a continuous output without damage.Be delivered with appropriate declaration/certificate of conformity.Be individually boxedBe deliverable through a standard UK letter plate and fit in packaging size L 160mm x H 34mm x D 45mm

Should

Have instructionsNot have a cable

Could

Be multi country socket compatibleHave an appropriate surface for branding in the future.

Won’t

Have any branding

Output voltage: 5.0V ±0.25V (at 500 mA) - this may be cheaper and more common to find but will not power/charge our display.

SAA power board